Training Courses

Training Courses

Training courses designed for all levels of installers of automation equipment
There is nothing training cannot do. Nothing is above its reach. It can turn bad morals to good; it can destroy bad principles and recreate good ones; it can lift men to angelship. - Mark Twain

Home

camesfae courses click here

Welcome to CAME Training

It is said that great knowledge is derived from great training. We at CAME pride ourselves in providing training to suit different levels of experience, from newcomers to the automation industry through to experienced installers.

Our courses not only cover the technical aspects of our products but include all aspects of the installation process, setup and safety standards. The Foundation course starts with an introduction to gate automation and follows on by introducing the CAME Gate Automation product gently to the audience. This is ideal for those who are new to this industry.

Our other courses specialise on the technical aspects of more advanced CAME products but continue to include installation concepts and solutions.

Our courses also include European Standards and Sales training to complete our portfolio and we can bespoke courses to meet individual company requirements on request.

Please browse the courses below and feel free to contact any of the CAME Team to discuss your requirements. Our experienced trainers look forward to welcoming you to our centres of knowledge.

Jon Brewis

CAME UK Training Manager

Download CAME Training Prospectus 2011  (3.0mb)
» Download PDF

Where are our training facilities?

  • CAME UK Head Office, Unit 3 Orchard Park Industrial Estate, Town Street, Sandiacre, Nottingham. NG10 5BP
  • CAME Manchester, Unit 14, Latham Close, Bredbury Park Industrial Estate, Bredbury, Stockport. SK6 2SD

Upcoming Dates

» see all dates

Foundation Level Course

Introduction to Gate Automation
Foundation Level Course

For the gate automation industry novice

If you are considering the Gate automation industry then this course is designed to be the perfect introduction to electric gates. Along with a general introduction to gate automation, you will find out about installation characteristics, types of motors and safety requirements, providing you with the knowledge to specify and quote with confidence for any forthcoming business. With the basic range of 230 and 24 volt CAME gate systems covered you will leave the training fully prepared to undertake your first installation of CAME equipment.

» Apply for this course

Who is it for?

Intended for individuals who are new to and not familiar with the gate automation industry

What will I get out of it?

Attendees will gain valuable foundation knowledge of the specification, installation and commissioning of a broad range of CAME gate automation products.

What will I receive?

Each attendee will receive a CAME Technical Documents DVD containing installation & technical pdf files and an official CAME certificate of attendance.

How many people will attend?

Each course is attended by a maximum of 16 delegates. There will be plenty of opportunities to ask questions throughout the day both during breaks or over your complimentary lunch.

How will the course be presented?

Our experienced course leader will give an informative theoretical presentation using projector slides and demonstrations in a classroom environment. This is followed by an in depth opportunity to wire and commission CAME motors & accessories on life sized gates and demonstration models in one of our dedicated training facilities.

What CAME products are covered?

Control Panels: ZA3N and ZL90
Motors: KRONO, FAST, FROG-J, AMICO and BX243
Accessories: DOC-E, DOC-I, DIR10, TOP432NA, AF43

How often does the course run?

There are 11 courses throughout 2011 - 6 times in Nottingham and 5 in Manchester.

Advanced Level Course

Professional Installer Training
Advanced Level Course

For those familiar with gate automation

If you or any of your engineers have industry experience or are looking to increase the understanding of CAME automation systems then this course is just for you. With a detailed look at the range of the CAME advanced programmable gate automation products, covering both 230 volt and 24 volt LCD control panels and the many configurable options and features available. This course also features the CAME sliding gate range of products and their capabilities and affords the opportunity for real practical experience on full size gate models. As with all of the CAME training courses a small investment in your time will pay dividends in your future installation works.

» Apply for this course

Who is it for?

Intended for individuals who are familiar with the gate automation industry and have installed gate automation before or have already attended the Foundation Level Course in Gate Automation.

What will I get out of it?

Attendees will gain deeper knowledge of the capabilities of the advanced range of CAME gate automation products including the range of CAME sliding gate motors.

What will I receive?

Each attendee will receive a CAME Technical Documents DVD containing installation & technical pdf files and an official CAME certificate of attendance.

How many people will attend?

Each course is attended by a maximum of 16 delegates. There will be plenty of opportunities to ask questions throughout the day both during breaks or over your complimentary lunch.

How will the course be presented?

Our experienced course leader will give an informative theoretical presentation using projector slides and demonstrations in a classroom environment. This is followed by an in depth opportunity to wire and commission CAME motors & accessories on life sized gates and demonstration models in one of our dedicated training facilities.

What CAME products are covered?

Control Panels: ZM3E, ZLJ24, ZBX and ZBK
Motors: Frog-AE, Frog-AE24, BX10 and BK2200
Accessories: DIR10, AF868, AF43TW, TOP862NA and TWIN

How often does the course run?

There are 11 courses throughout 2011 - 6 times in Nottingham and 5 in Manchester.

Traffic Access Course

Barriers, Bollards & Car Park Control
Traffic Access Course

For commercial access control

For those who currently install industrial automation products or for those who wish to do so, this course will introduce you to the range CAME Automatic Barriers, their installation and setup for correct operation. The course then moves on to an overview of URBACO Automatic Rising Bollards and looks at the installation of the ground casings, the pnuematic and electrical requirements and the commisioning procedure. With real working practice equipment at your fingertips and our knowledgable tutor, you can be assured of the skills required to install in this lucrative sector of the Automation industry.

» Apply for this course

Who is it for?

Intended for individuals who need to understand commercial access control through the CAME range of Road Barriers and Urbaco Automatic Rising Bollards. General civil installation knowledge would be helpful to understand the installation process.

What will I get out of it?

Attendees will receive knowledge of the specification, installation & commissioning of the range of barriers, bollards and car park control systems available from CAME.

What will I receive?

Each attendee will receive a CAME Technical Documents DVD containing installation & technical pdf files and an official CAME certificate of attendance.

How many people will attend?

Each course is attended by a maximum of 16 delegates. There will be plenty of opportunities to ask questions throughout the day both during breaks or over your complimentary lunch.

How will the course be presented?

Our experienced course leader will give an informative theoretical presentation using projector slides and demonstrations in a classroom environment. This is followed by a hands on practical session with relevant working practice products in one of our dedicated training facilities.

What CAME products are covered?

Control Panels: ZL37, ZL38 and U200
Motors: G6000, GARD8, LUXOR and GENERATION6
Accessories: AF43, TOP432NA and SMA

How often does the course run?

Please contact us on 0115 921 0430 for availability.

Comunello Gate Hardware

Cantilever Sliding Gate Systems
Comunello Gate Hardware

For installers of tracked & cantilever sliding gate systems

Are you a fabricator looking to learn the secrets of the cantilever gate system? or simply looking to improve your mechanical knowledge of the latest gate transmission systems? Either way this course is intended to introduce you to the range of products available from Comunello and will include an introduction to sliding gates, their components and configuration for both tracked and cantilever system installations. As part of the course you will be given access to the Comunello Cantilever “WIN GATE” system design software, which makes specifying concrete base requirements and appropriate sliding gate hardware very simple. To complete the picture an automation overview to help specify the correct motor and accessories for safety is also included.

» Apply for this course

Who is it for?

Intended for those who want a better understanding of the Comunello range of hardware products used for Tracked and cantilever sliding gate systems and components used in swing gate installation. It will also give an overview on Comunello’s extensive product range available through CAME.

What will I get out of it?

Attendees will receive knowledge on how to correctly specify & install the Comunello range of professional gate hardware with guidance on installing cantilever and tracked sliding gates as well as steps to ensure the safety of sliding gate systems.

What will I receive?

Each attendee will receive a CAME Technical Documents DVD containing installation & technical pdf files, access to the Win.Gate Cantilever specification online system and an official CAME certificate of attendance.

How many people will attend?

Each course is attended by a maximum of 16 delegates. There will be plenty of opportunities to ask questions throughout the day both during breaks or over your complimentary lunch.

How will the course be presented?

Our experienced course leader will give an informative theoretical presentation using projector slides and demonstrations in a classroom environment. This is followed by a hands on practical session with demonstration products in one of our dedicated training facilities.

What products are covered?

Monorail options:
150/250 & 350 series
Cantilever Trolleys:
150/250 & 350 series
Accessories: Hinges, end-stops, support rollers

How often does the course run?

Please contact us on 0115 921 0430 for availability.

Application, Installation & Safety Requirements

Automatic Door Systems & Turnstiles
Automatic Door Systems & Turnstiles

For installers of automatic sliding doors & turnstiles

CAME has a broad and flexible range of automation systems for both sliding and swing doors and this course offers the highest levels of training collated from years of installation experience. You will be introduced to automatic doors and turnstiles used for the control of access into buildings as well as automation for interior doors. Learn the skills to specify, install and maintain door systems and take advantage of the DDA regulations that drive this multi million pound sector of the automation industry. With the added advantage of training on the wide range of CAME Turnstiles this course can only add to the portfolio of products you can install.

» Apply for this course

Who is it for?

Intended for individuals who install automatic sliding and swing internal doors and turnstiles to control access into buildings and premises.

What will I get out of it?

Attendees will receive knowledge on how to correctly specify, install, commission & maintain CAME automatic sliding doors, swing doors and access control turnstiles.

What will I receive?

Each attendee will receive a CAME Technical Documents DVD containing installation & technical pdf files and an official CAME certificate of attendance.

How many people will attend?

Each course is attended by a maximum of 16 delegates. There will be plenty of opportunities to ask questions throughout the day both during breaks or over your complimentary lunch.

How will the course be presented?

Our experienced course leader will give an informative theoretical presentation using projector slides and demonstrations in a classroom environment. This is followed by a hands on practical session with relevant working practice products in one of our dedicated training facilities.

What CAME products are covered?

Control Panels: ZP8, ZP7, ZP10 and TOR100
Motors: Rodeo, Corsa, Fly (PB1100) and Twister
Accessories: MA7041, MR8334, MR8104 and MF9011

How often does the course run?

Please contact us on 0115 921 0430 for availability.

 

Strategic Sales & Marketing Course
Strategic Sales & Marketing Course

For sales & marketing in the gate automation industry

This sales course is a professionally produced presentation designed to help automation businesses thrive even during the current difficult economic times. The seminar will present successful sales methods and theory in a manner that is relevant and appropriate to the automation industry, with ideas and tools to help your business succeed.

» Apply for this course

Who is it for?

The course has been specifically designed from the ground up for the automation industry and is ideal for all gate installation companies. Be it business owners, business managers, sales staff, installation engineers or surveyors, we are sure there will be something of value for everyone.

What will I get out of it?

We hope that you will gain a detailed insight into the marketing and sales process and will leave with many new ideas and techniques to implement within your own business.

What will I receive?

Each attendee will receive a full course handbook which will include a vast array of invaluable sales tools discussed during the course.

How many people will attend?

We anticipate that around 40 people will attend the presentation. There will be time during breaks and before the presentation concludes, to ask questions and discuss ideas.

How will the course be presented?

The presentations are set up in a theatre style. The experienced presenter will give an informative talk supported by projector slides, demonstrations and other tools.

What CAME products are covered?

Control Panels: ZA3N and ZL90
Motors: KRONO, FAST, FROG-J and AMICO
Accessories: DOC-E, DOC-I, DIR10, TOP432NA, AF43

How often does the course run?

Please contact us on 0115 921 0430 for availability.

 

Courses offer installers the opportunity the learn how to wire and commission CAME automation equipment.

Completion of a CAME Training course does not guarantee the competence of the delegate to perform work in the relevant field, CAME makes no representation as to such competence or ability. In undertaking any work, the installer is resposible in ensuring that ALL work is within their competence and complies fully with any applicable regulations and standards. Installers are advised seek further instruction or supervision, if necessary.

Other products