Automation ready in minutes
Thanks to the new VER system it is now even easier to motorize a garage door. Just couple the transmission rail to the motor and the automation is ready to install. VER is quick to install and no modifications to the doors are necessary, it is attached to the roof in line with the centre of the door and is, therefore, an EASY and cost-effective system. All the VER series operators are powered at 24V, in the interests of safety and reliability.
The motor-guide unit assembly is simple and fast to put together. Also, the guides (available in various models) are ready for use, and supplied to fit the height of the door requiring motorisation. Within the unit motor there is also space for housing emergency batteries, which will power the opening, should the mains voltage be cut off. (detail: VER batteries) A total safety system. Built into the unit, the control board powers the motor and all the accessories connected to the low voltage (24V) system.
Main Functions
Technical Information
Type
V600
V600E
V700
Protection level
IP40
Power supply
230V 50/60 Hz
Motor power supply
24V d.c.
Absorbed input
6A max
6A max
11A max
Max. torque
130W
130W
260W
Duty cycle
6 m/min
Operation intermittence
50%
Traction force
500 N
500N
850N
Operating temperature
-20°C min. +70°C max.
• SELF PROGRAMMING of the radio code between transmitter and receiver.
• PRE-FLASHING during opening and closing.
• DOOR STOP directly by the transmitter.
• SAFETY ALSO WITH MOTOR OFF: all opening/closing commands are cancelled if an obstacle is detected by the photoelectric cells.
• EMERGENCY OPERATIONS: it is possible to connect the V0670 board for battery operation.
• AMPEROMETRIC OBSTACLE DETECTION: this function makes movements safer still and is adjustable by a dedicated trimmer.
• ENVIRONMENT LAMP: supplied as standard on all models, it replaces or adds to the lighting of the garage and makes it easy and safe to use the automation.