Modularity and Performance
The H series of motors represent a system which can easily automate every type of roll-up shutter. A single model, adapted for use in all manner of situations without the need for alterations. The possible addition of a second motor, moreover, allows the opening of doors with greater dimensions.
A unique model, adaptable to shutter poles of both 48 mm diameter and those of 60 mm. The same applies to 200 mm- or 220 mm diameter balancing springs.
The H1003 and H1103 operators may be integrated when necessary with a second motor to increase lifting force. Therefore, lift capacity is increased from 120 kg to 200 kg with double-motor versions. The ZR24 control panel allows creation of automations for shutters that comply with current safety regulations. It is also equipped with incorporated radio decoding for the remote control transmitter. (detail: ZR24 control panel)
Main Functions
Technical Information
Type
Protection level
IP40
Power supply
230V 50/60 Hz
RPM
9 rpm
Absorbed input
2.4 A
2.4 A
4.5 A
4.5 A
Max. torque
270W
270W
500W
500W
Reduction ratio
i = 1/150
Operation intermittence
30%
Life capacity
120 kg
120 kg
200 kg
200 kg
Operating temperature
-20°C min. +70°C max.
The main features of the ZR24 control panel are:
• SELF-LEARNING of the radio code between transmitter and receiver.
• AUTOMATIC CLOSURE operates after the pre-set time set on the dedicated trimmer.
• COURTESY LIGHT for more safety and for lighting the shutter’s movement area.
• “JOG” COMMAND, which means the pushbutton must be kept pressed down to make the shutter move.
• CONNECTIONS FOR ACCESSORIES like the flashing light indicating movement and the infrared beam photoelectric cells.